anaren, inc. / 6635 kirkville road / east syracuse, ny 13057 800.411.6596 / http://www.anaren.com / air@anaren.com ? frequency range: 902 - 928 mhz (n. america) and 868 - 870 mhz (europe) ? fcc, ic and etsi compliant, shielded package ? digital rssi output ? programmable output power up to +10dbm ? high sensitivity ( - 112 dbm at 1.2 kbaud, 915 mhz 1% packet error rate) ? ultra - small package size 9 x 16 x 2.5mm ? lga footprint ? rohs compliant ? operating temperature - 40 to +85c ? impedance - controlled, multi - layer pcb ? 1.8 to 3.6 vdc ? low current consumption (15 ma in rx, 1.2 kbaud, 915 mhz) ? 200 na sleep mode current consumption ? efficient spi interface; all registers can be programmed with one burst transfer ? available in tape & reel and matrix tray a110lr09a the a110lr09a is a ultra low cost, high - performance, fcc & ic certi- fied radio module that incorporates the texas instruments cc110l value line transceiver chip in the industrys smallest package (9 x 16 x 2.5mm). 110l series features benefits block diagram this product shall not be used in any of the following products or systems without prior express written permission from anaren microwave, inc: (i) implantable cardiac rhythm management systems, including without limitation pacemakers, defibrillators and cardiac resynchronization devices; (ii) external cardiac rhythm management systems that communicate directly with one or more implantable medical devices; or (iii) other devices used to monitor or treat cardiac function, including without limitation pressure sensors, biochemical sensors and neurostimulators. ? minimal rf engineering experience necessary ? no additional intentional radiator certifica- tion required (fcc cfr 47 part 15, ic rss - 210) ? minimal real estate required ? easily implemented on a two layer pcb ? no additional harmonic filtering required ? 100% rf - tested in production ? common footprint for product family ? no additional dc decoupling required ? integrated analog temperature sensor ? excellent receiver selectivity and blocking performance ? suitable for frequency hopping systems, thanks to a fast - settling frequency synthesizer with 90 s settling time ? impedance - matched balun for optimized effi- ciency ? support for asynchronous and synchronous serial receive/transmit mode for backwards compatibility with existing radio communica- tion protocols please note: additional information on the texas instruments cc110l device can be found in the companys latest datasheet release at http://www.ti.com
anaren, inc. / 6635 kirkville road / east syracuse, ny 13057 800.411.6596 / http://www.anaren.com / air@anaren.com product overview nomenclature caution! esd sensitive device. precautions should be used when handling the device in order to prevent permanent damage. the a110lr09a is a high - performance, dual - band fcc & ic certified and etsi compliant radio module that incorporates the texas instruments cc110l value line low - cost transceiver chip in the industrys smallest package (9 x 16 x 2.5mm) and is compatible with all ti - approved software stacks. with an lga pad footprint, this module is de- signed to effortlessly integrate into a wide range of applications, including: industrial control, build- ing automation, low - power wireless sensor net- works, lighting control, and automated meter reading. the a110lr09a has an rohs - compliant enig finish and is packaged on tape and reel for high - volume automated manufacturing. footprint pin diagram a (anaren) 1 chip series (cc1101, cc110l, cc2500) 2 function (r = radio only) 3 frequency band (x100mhz) 4 form factor (a = internal antenna, c = connector) 5 design id (00 = default) 6 application (g = general) 7 packaging (r = tape/reel, m = matrix tray) 1150b refer to users manual for additional layout guidelines. dimensions in mm. dnc = do not connect
|